100G Tester

-Test set for testing transmission networks running at 100 Gbps

10G Tester

- Transmission Test set for STM64 and 10 Gigabit Ethernet (LAN/WAN)

40G Tester

- Transmission Test set for STM 256

Base Station Analyzer

-An analyzer that integrates multiple functions eliminating the need to use multiple instruments. It combines the functionality of spectrum analysis, interference analysis, cable and antenna analysis.

Battery Tester

- On line and Off-line battery of testers that performs conductance measurement

BER Tester

- Transmission Test set for testing nx64kbps circuits.

Cable Analyzer

Cable and Antenna Analyzer

-Test equipment used for testing transmission systems of cell sites. Measurements include VSWR, DTF, Cable Loss and RF Power.

Cable TV Analyzer

- Signal Level Meters, Leakage Meters, Sweep Systems for forward and reverse path

Copper Tester

-Comprehensive Test tools for OSP testing that includes DVOM, RFL and TDR measurements. These tools allow qualification of copper lines for DSL and isolation of copper problems

CPE Tester

- Allows testing of xDSL CPE's in accordance to ADSL Forum's Technical Recommendations

- used for Interoperability testing

Data Network Analyzer

-Network Analyzers incorporates intuitive, real-time analysis to identify the root cause of network and customer applications problems on 10/100/1000 Ethernet, WAN, ATM, Mobile, and VoIP networks.

DSL Tester

- ADSL1/2/2+ services installation and maintenance tool for field engineers.

FE/ GE Tester

-Easy to use, cost effective Ethernet testing solution for basic physical layer cable testing, layer 2 and layer 3 traffic generation, and full RFC 2544 testing.

Fiber Identifier

-Fiber Identifier are rugged, handheld, easy-to-use installation and maintenance instruments that identify optical fibers by detecting the optical signals being transmitted through a singlemode fiber

FTTX Test Equipment

- PON Power Meter and Laser Source, PON Optimized OTDR

ISDN Tester

-Basic Rate and Primary Rate Tester; allows call simulation and monitoring

-The PRI tester can function as a Terminal Equipment (PABX) or Network Termination (Switch). It can also monitor the calls as a protocol analyzer.

IPTV Analyzer

The test suite includes Set Top Box (STB) emulation with signaling support for Broadcast Video (IGMP) and VOD

(RTSP). Video Transport Stream analysis is provided, as well as video Quality of Service measurements: Packet Jitter, Packet Loss, IGMP latency, and PCR (Program Clock Reference) Jitter analysis.

Line Simulator

-Wireline simulator for various loop lengths and bandwidth

MFCR2 Analyzer

- Test equipment that can be used to emulate an MFCR2 PABX and Switch.

- It can also be used to monitor MFCR2 signalling

Noise Generator

-Easy way to add variable white noise to CO and/or CPE ends of our loop simulators. Plug-in module fits in all our chassis. Also works with real cable.

Optical Cleaning Kit

- IBC (or One Click Cleaner) for 1.25 or 2.5mm ferrule; can be used to clean ODF's and patchcords

- refills are also available

Optical Laser Source

- Optical Light Sources for Insertion Loss Testing. Various wavelengths and models are available

-Single mode and multimode versions and LED and Laser Sources are all available

Optical Loss Test Set

- An optical handheld tool that combines the features of power meter and laser source in one unit

Optical Power Meter

-Mainly used to measure optical power level (dBm) in premises, telco, or CATV fiber optic networks, they also can be combined with LED or laser light sources for insertion loss measurement

Optical Spectrum Analyzer

-It is an ideal test tool for service providers to install, maintain and upgrade metro/access links and CWDM/DWDM systems. It measures wavelengths and power levels of all channels and displays the complete spectrum.

Optical Attenuators

-Used for receiver sensitivity testing

Optical Talk Set

- The Optical Talk Set provides clear digital voice transmission over a single fiber. Hands free operation makes communication even more convenient for the technician by using either a headset or the "speaker phone" mode.

Optical Cleaning Kit

-A complete set of essential accessories for connector cleaning and maintenance to ensure best measurement performance from your optical handhelds

OTDR (Optical Time Domain Reflectometer)

-Tools that measures optical fiber length and loss. Over 40 different modules to choose from

-Highest dynamic range up to 50 dB.

-Shortest dead zones down to 0.8 m.

-Fastest scan speed at 0.1 s in real-time mode.

-Four-wavelength singlemode module.

-Up to 128000 acquisition points with sampling resolution down to 4 cm.

PDH Tester

-Transmission Test set for E1 (2Mbps), E2(8Mbps), E3(34 Mbps) E4(140Mbps)

Repair and Calibration Services

Revenue Assurance Tester

-Fraud Detection

RF Analyzer

-Handheld and Bench top Spectrum Analyzers

RF Power Meter

- Performs RF Power measurment

SDH Analyzer

-Transmission Test set for STM1/4/16 and 64

Signalling Analyzer

-Protocol analyzers that support fixed and mobile technologies like UMTS, Wimax and LTE. This analyzer enables comprehensive protocol analysis on all major interfaces in GSM/GPRS/UMTS and CDMA networks as well as from ISDN PRI through ATM, IP and SS7

Signalling Monitoring System

-A rack mount solution for data and telecommunication centers. Its High Performance, Large Storage, and Analysis capabilities make IPXPlorer® Flex the perfect tool for broad Network Monitoring; Data, Voice and Video Recording; End-to-End Session Trace and Troubleshooting; Quality of Service and Quality of Experience measurements.

SS7 Analyzer

-SIgnalling analyzer for SS7

Telecom Analyzer

- Multi infterace multi protocol Telecom and Datacom Analyzers

-This is a light and portable hand-held protocol and services analyzer capable of monitoring virtually any type of IP and Telecommunication Networks . It analyzes services for Mobile and Fixed networks, MBB, IP, IPTV, VoD, IP Core, SigTran, IMS, and any other NGN architecture.

Tone Tracer

-This is an ergonomic, powerful, and accurate tracer with highly sensitive signal reading capabilities for locating telco, network, and coax cable. With a built-in tone generator, two different tones, and auto-off feature, the Trace-Rite is a reliable, easy-to-use tool that allows installers to easily find wires behind walls, floors, and ceilings.

Traffic Generator

- L1 to L7 traffic generator

Video Fiber Microscope

-Used for fiber inspection. Allows easy identification of dirty and damaged connectors and patchcords

Visual Fault Locator

-The visual fault locator (VFL) is an essential tool that quickly and easily locates problem areas in fiber cables. By pinpointing the exact location of fiber damage, technicians can diagnose, troubleshoot, and fix the problem efficiently.

VoIP Analyzer

-Signalling and Media Analyzer.

Wifi Tester

-The Wifie tester captures and displays essential information regarding identity, functionality, and capability of IEEE 802.11 b and g wireless devices. This wireless network analyzer detects and connects to wireless equipment, reports signal strength, pings Internet protocol (IP) addresses, and identifies network components.